- Temperature difference sensors: tested for 0.1 °C accuracy requirements
- Superior heat flux sensor, stable: waterproof (IP67), corrosion-proof
- Continues measuring when others give up: high sensitivity amplifier + high sensitivity sensors
-
TRSYS01 is a high-accuracy system for on-site measurement of thermal resistance, R, thermal conductance, the Λ-value, and thermal transmittance, the U-value, of building envelopes. TRSYS01 is mostly used for measurements according to standard practices of ISO 9869 and ASTM C1155 / C1046. The system is equipped with high-accuracy electronics, two heat flux sensors of model HFP01 as well as two pairs of matched thermocouples. The two measurement locations provide redundancy, leading to a high level of confidence in the measurement result. The high accuracy of the heat flux sensors and temperature difference measurements ensures that TRSYS01 continues measuring when other systems no longer perform; in particular at very low-temperature differences across the wall. -
TCOMSYS01 is a measuring system to help understand and quantify “causes and effects” leading to human thermal comfort. The TCOM01 body is temperature stabilized at 33 °C so that it offers a relatively direct measurement of the human experience. In essence, TCOM01 is a miniature thermal mannequin, measuring according to the innovative Hot Cube method. The heater power required to keep the TCOM01 at a constant temperature is the main measurand. Incorporating 5 heat flux sensors with a black absorber also offers a detailed picture of the heat gain and loss from different directions, and a good indication of convective and radiative asymmetry. Other measurements are sensor body temperature, air temperature, and relative humidity. In its standard configuration, the system consists of an MCU (Measurement and Control Unit) and a TCOM01 sensor. The MCU offers a direct connection to any local area network and “Ethernet over USB”. TCOM01 is also available as a sensor only.TCOMSYS01 advantages
- direct representation of the human body
- helps understand and quantify the detailed physical cause and effect of thermal comfort
- simple experiments can be used to quantify the sources of heat gain or loss
- offers directional information
- good addition to Wet-Bulb Globe temperature measurement
- robust, student-proof
- “stand-alone”; equipped with its own clock and memory
- safe, low voltage power supply
- communication by (virtual) Ethernet link
- user interface program on MCU
-
SRA15 series spectrally flat Class B albedometer is an instrument that measures global and reflected solar radiation and the solar albedo, or solar reflectance. It is composed of two SR15 series spectrally flat Class B pyranometers and one AMF03 albedometer mounting kit. AMF03 includes one glare screen, one mounting fixture with rod, mounting hardware, and tools. Each pyranometer has a thermopile sensor, the up-facing one measuring global solar radiation, the downfacing one measuring reflected solar radiation. You may choose digital SR15-D1 pyranometers with heating, analog SR15-A1 pyranometers, offering millivolt output and heating, or SR15-D2A2 pyranometers with 4-20 mA output. SRA15 complies with the latest ISO and WMO standards. The modular design facilitates maintenance and calibration.- digital SR15-D1 pyranometers with heating, or analog SR15-A1 pyranometers, offering millivolt output and heating, or SR15-D2A2 pyranometers with 4-20 mA output
- SRA15 complies with the latest ISO and WMO standards.
- modular design facilitates maintenance and calibration
-
Hukseflux offers a full range of practical brackets for mounting atmospheric radiation sensors in all climates and weather conditions. CMF01 is a versatile fixture allowing the mounting of a crossarm onto a vertical mast. It is typically used with SR05, SR15, and SR30 pyranometers with their mounting fixtures. It can also be used in combination with NR01 net radiometers and SRA series albedometers.- quick installation
- strong mast-to-crossarm connection
- carries multiple instruments
-
ALF01 is a leveling tool that can be used with AMF02, AMF03, and SRA series albedometers to easily level the instrument. The ALF01 is mounted on a 1-inch outer diameter crossarm, and can be rotated around the tube axis for 360 ° as well as tilted over ± 2 °.- easily level your albedometer
- can be rotated around the tube axis for 360 ° as well as tilted over ± 2 °
-
Hukseflux offers a practical range of mounting and levelling fixtures to construct albedometers from its popular pyranometers. Albedometers are increasingly popular in bifacial PV module monitoring. AMF02 allows you to combine two SR11 or two SR20(-D2) pyranometers into one albedometer. The modular design facilitates maintenance and calibration. The AMF02 albedometer kit includes a mounting fixture and a glare screen. ALF01 is a levelling fixture that may be combined with AMF02, and helps levelling the instrument.- combine 2 pyranometers into 1 albedometer with our AMF02 albedometer kit
- AMF / ALF series is easy to use
-
Hukseflux offers a practical range of mounting and levelling fixtures to construct albedometers from its popular pyranometers. Albedometers are increasingly popular in bifacial PV module monitoring. The new AMF03 albedometer kit can be combined with two model SR30 pyranometers to construct an albedometer of spectrally flat Class A, the highest accuracy class according to ISO 9060 (formerly known as ‘secondary standard’). AMF03 may also be combined with two model SR15 pyranometers to construct a spectrally flat Class B albedometer. The modular design facilitates maintenance and calibration of the pyranometers. AMF03 albedometer kit includes a mounting fixture, a glare screen, mounting instructions and a set of hex keys. All else you need are two suitable pyranometers.- combine 2 pyranometers into 1 albedometer with our AMF03 albedometer kit
- AMF / ALF series is easy to use
- modular design facilitates maintenance and calibration of the pyranometers
-
SRA30-M2-D1 digital spectrally flat Class A albedometer is an instrument that measures global and reflected solar radiation and the solar albedo, or solar reflectance. SRA30-M2-D1 is the most accurate albedometer available and heated for the best data availability. It is composed of one AMF03 albedometer mounting kit and two SR30-M2-D1 spectrally flat Class A (previously "secondary standard") pyranometers. This pyranometer is compliant in its standard configuration with the requirements for Class A PV monitoring systems of the IEC 61724-1:2017 standard. Each pyranometer has a thermopile sensor, the up-facing one measuring global solar radiation, the downfacing one measuring reflected solar radiation. AMF03 includes one glare screen, one mounting fixture with a rod, mounting hardware, and tools. The modular design facilitates maintenance and calibration.- the most accurate albedometer
- compliant with requirements for Class A PV monitoring systems
- heated for high data availability, featuring RVH technology
- modular design of SRA30 facilitates maintenance and calibration
-
VMA01 is a practical mounting adapter that, when combined with PMF01, helps mounting VU01 externally ventilated pyranometers on a vertical mast, horizontal crossarm, flat wall, or fence. It allows for horizontal as well as tilted (Plane of Array) orientation. The use of VMA01, compatible with a Hukseflux pyranometer ventilated by VU01 ventilation unit, is easy.- quick installation
- easy leveling using PMF01 spring-loaded bolt
- mounting a VU01 ventilated pyranometer with a PMF01, horizontal or tilted
-
Model PMF02 enables a setup of two pyranometers, of which one in Plane of Array (POA), mounted to a frame or fence; ideal for PV system performance monitoring according to the latest IEC standards. PMF02 is compatible with all Hukseflux pyranometers.- Ideal for PV monitoring
- Quick installation
- Easy leveling using a spring-loaded bolt
- For mounting two pyranometers to a frame or fence, one horizontal and one in Plane of Array (tilted)